Lighting Controllers

The QUBINO Z-Wave ON/OFF Thermostat, manufactured by GOAP in Europe, is ideal for directly controlling electric or water-based heating systems such as electric water heaters or hot water pumps.

The absolute best selling QUBINO Z-Wave Dimmer 0-10V, manufactured by GOAP in Europe, is unique. This Z-Wave product which was developed to provide for the needs of Smart Home users looking for a Z-Wave solution that controls devices such as lights, fans and similar products with 0-10V signal. The QUBINO Flush Dimmer 0-10V is ideal for remotely dimming LED lights with low voltage ballast.

The QUBINO Z-Wave Dimmer, manufactured by GOAP in Europe, is the first MOSFET- switching light Z-Wave dimmer module that also supports control of low-voltage halogen lamps with electronic transformer, dimmable compact fluorescent lights and dimmable LED bulbs. It also measures the power consumption of electrical devices and supports the connection of a digital temperature sensor.

The QUBINO Z-Wave 2 Relays, manufactured by GOAP in Europe, is a Z-Wave module for switching on or off one or two electrical devices (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted  behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

The QUBINO Z-Wave 1D Relay, manufactured by GOAP in Europe, is a single channel wireless Z-Wave relay with voltage-free (dry) contacts capable of controlling lights and appliances up to 10A. It connects wirelessly with your Z-Wave controller and fits easily into an existing light switch, enabling you to wirelessly control appliances. The smart switching module also works as a repeater to improve range and stability of your Z-wave network. The module can be controlled either through Z-wave network or through the wall switch manually.

The QUBINO Z-Wave 1 Relay, manufactured by GOAP in Europe, is a Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted  behind a traditional wall switch. Module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-Wave network.

 The Fibaro Z-Wave Single Switch Controller is a wireless controller which can control appliances or lighting up to a maximum load of 2.5kW 10A. 

 The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW. 

 The Fibaro Z-Wave Double Switch Controller (FGS-222) is a wireless controller which can control two circuits each with a maximum load of 1.5kW per circuit. 

The new Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave wireless module which can control two circuits each with a maximum load of 6.5A per channel and 10A total load per circuit. 

The FIBARO Z-Wave RGBW Controller is a wireless controller which enables you to manage your lighting decoration.

 The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is a newest version of a popular wireless controller designed to operate behind a wall switch.

The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.

Unleash your fantasy decorating a living-room or bathroom. Create illumination effect to match weather conditions, your mood or a special occasion. 3 million colours on hand, waiting for your ideas!

This flexible strip light is perfect for any kind of illumination. Silicon gel type waterproof. Can be used for home ceiling, bathroom and kitchen lights, furniture, shelves and cupboards etc.

The AEOTEC WallMote is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, the AEOTEC WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.

WallMote is the wall switch that you can install anywhere. Wirelessly. WallMote is the wall switch for anywhere because of it is simple to install. WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done. Because WallMote communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can.

Control any switch. From anywhere. Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you’re not standing right next to them or can’t reach them, they’re limited. No more. The future is smarter. So is your home. The Aeotec Smart Switch 6 offers completely wireless control of your switches and sockets.

The AEOTEC Nano Switch offers total control, easily. Impossibly small, each AEOTEC Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install the AEOTEC Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.

The AEOTEC Nano Dimmer InWall dramatically improves the lighting in your home. Aeotec 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.

The AEOTEC Nano Switch offers total control, easily. Impossibly small, each AEOTEC Dual Nano Switch installs invisibly behind any of your home’s existing switches or power sockets. Simply unscrew the faceplate, install the AEOTEC Nano Switch behind it, and you now have complete wireless control. Your old switches are instantly modern and instantly connected.

Intelligent, Z-Wave lighting is finally made simple. With RGBW LED Bulb from Aeotec, Z-Wave lighting control moves from the hard-wired switch and direct to an easily installed bulb. Easy is the key word. Easy to integrate. Easy to install. Easy to operate. Easy to dim. LED Bulb removes all the compatibility issues that are a part of other Z-Wave lighting solutions, building all the control and technology right into the bulb. And it does so at a very high quality. LED Bulb outputs perfect pure white light. That perfect quality light is measured at 750 lumens and is completely dimmable making LED Bulb easy to install and beautiful to be hold.

Stop dimmed lights flickering.

Dimming energy-saving lights is complicated – there’s a lot of different technologies built into modern bulbs.
That’s why dimmed lights sometimes flicker or remain on – power trickles through. The AEOTEC Dimmer Bypass works with the AEOTEC Nano Dimmer to remove the signals from your power line that cause low-watt lightbulbs to flicker.